Switch User Manual

W EB -B ASED M ANAGEMENT
3-29
Configuring Bridge MIB Extensions
The Bridge MIB includes extensions for managed devices that
support Traffic Classes and Virtual LANs. To display and configure
these extensions, use the Bridge Extension screen as shown
below:
Bridge Capability
Parameter Description
Extended Multicast
Filtering Services*
This switch does not support filtering of individual
multicast addresses based on GMRP (GARP Multicast
Registration Protocol).
Traffic Classes This switch provides mapping of user priorities to
multiple traffic classes. (Refer to the Priority menu on
page 3-31.)
Static Entry
Individual Port
This switch enables static filtering for unicast and
multicast addresses. (Refer to the Address Table
Configuration on page 3-20.)
VLAN Learning This switch uses Shared VLAN Learning (SVL), where
the VLAN filtering database is shared among all ports.
Configurable
PVID Tagging
This switch allows you to override the default PVID
(Port VLAN ID) assigned to untagged incoming frames
under VLAN Port Configuration on “VLAN Port
Configuration” on page 3-39.
Local VLAN
Capable*
A local bridge (that is, dedicated Spanning Tree) is
applied to each individual VLAN.
* These functions are not available for the current firmware release.