Switch User Manual

W EB -B ASED M ANAGEMENT
3-27
STA Port Configuration
The following figure and table describe STA configuration for ports
or modules.
Parameter Default Description
Fast
Forwarding
Mode
(All Ports)
Enabled See “Fast Forward” in this table.
Priority 128 Defines the priority for the use of a port in the STA
algorithm. If the path cost for all ports on a switch
are the same, the port with the highest priority (i.e.,
lowest value) will be configured as an active link
in the spanning tree. Where more than one port is
assigned the highest priority, the port with lowest
numeric identifier will be enabled.
The range is 0 - 255.