24-Port Layer 3 Switch Management Guide

C ONFIGURING THE S WITCH
3-48
Web – Specify the action (i.e., Permit or Deny). Specify the source and/or
destination addresses. Enter a specific address (e.g., 11-22-33-44-55-66).
Or enter a base address and a hexadecimal bitmask for an address range.
Set any other required criteria, such as Ethernet type, or packet format.
Then click Add.
CLI – This rule permits packets from any source MAC address to the
destination address 00-e0-29-94-34-de where the Ethernet type is 0800.
Console(config-mac-acl)#permit any host 00-e0-29-94-34-de
ethertype 0800 4-85
Console(config-mac-acl)#