24-Port Layer 3 Switch Management Guide

B
ASIC
C
ONFIGURATION
3-27
CLI – This example configures the switch to operate as an SNTP
broadcast client.
Setting the Time Zone
SNTP uses Coordinated Universal Time (or UTC, formerly Greenwich
Mean Time, or GMT) based on the time at the Earth’s prime meridian,
zero degrees longitude. To display a time corresponding to your local time,
you must indicate the number of hours and minutes your time zone is east
(before) or west (after) of UTC.
Command Attributes
Name – Assigns a name to the time zone.
Hours (0-12) The number of hours before/after UTC.
Minutes (0-59) The number of minutes before/after UTC.
Direction Configures the time zone to be before (east) or after (west)
UTC.
Web Select SNTP, Clock Time Zone. Set the offset for your time zone
relative to the UTC, and click Apply.
CLI - This example shows how to set the time zone for the system clock.
Console(config)#sntp client 4-42
Console(config)#sntp poll 16 4-44
Console(config)#sntp server 10.1.0.19 137.82.140.80
128.250.36.2 4-43
Console(config)#sntp broadcast client 4-45
Console(config)#
Console(config)#clock timezone 06.00 hours 6 minute 58
before-UTC 4-46
Console#