24-Port Layer 3 Switch Management Guide

U
PGRADING
F
IRMWARE
VIA
THE
S
ERIAL
P
ORT
B-4
16. To set the new downloaded file as the startup file, use the [S]et
Startup File menu option.
17. When you have finished downloading code files, use the [C]hange
Baudrate menu option to change the baud rate of the switchs serial
connection back to 9600 baud.
18. Set your PC’s terminal emulation software baud rate back to 9600
baud. Press <Enter> to reset communications with the switch.
19. Press <q> to quit the firmware-download mode and boot the switch.