24-Port Layer 3 Switch Management Guide

C ONFIGURING THE S WITCH
3-12
Basic Configuration
Displaying System Information
You can easily identify the system by displaying the device name, location
and contact information.
Field Attributes
• System Name – Name assigned to the switch system.
• Object ID – MIB II object ID for switch’s network management
subsystem.
• Location – Specifies the system location.
• Contact – Administrator responsible for the system.
• System Up Time – Length of time the management agent has been up.
These additional parameters are displayed for the CLI.
• MAC Address
*
– The physical layer address for this switch.
• Web server – Shows if management access via HTTP is enabled.
• Web server port – Shows TCP port number used by the Web interface.
• POST result – Shows results of the power-on self-test
* Web: See “Setting the IP Address” on page 3-9.
General Enables DHCP server; configures excluded
address range
3-56
Pool Configuration Configures address pools for network groups or
a specific host
3-57
IP Binding Displays addresses currently bound to DHCP
clients
3-62
ACL 3-41
ACL Configuration Configures packet filtering based on IP or MAC
addresses
3-41
ACL Port Binding Binds a port to the specified ACL 3-49
Menu Description Page