24-Port Layer 3 Switch Management Guide
C
OMMAND
L
INE
I
NTERFACE
4-294
Command Mode
Router Configuration
Example
flash-update-interval
Use this command to specify how often to send trigger updates, which
reflect changes in the network topology. Use the no form to restore the
default value.
Syntax
flash-update-interval seconds
seconds - Interval between sending flash updates when network
topology changes have occurred. (Range: 1-65535)
Default Setting
5 seconds
Command Mode
Router Configuration
Example
prune-lifetime
Use this command to specify how long a prune state will remain in effect
for a multicast tree. Use the no form to restore the default value.
Syntax
prune-lifetime seconds
seconds - Prune state lifetime. (Range: 1-65535)
Console(config-router)#report-interval 90
Console(config-router)#
Console(config-router)#flash-update-interval 10
Console(config-router)#