24-Port Layer 3 Switch Management Guide

IP R
OUTING
C
OMMANDS
4-245
Interface Configuration
ip ospf
authentication
Specifies the authentication type for an
interface
IC 4-263
ip ospf
authentication-key
Assigns a simple password to be used by
neighboring routers
IC 4-264
ip ospf
message-digest-key
Enables MD5 authentication and sets the key
for an interface
IC 4-265
ip ospf cost Specifies the cost of sending a packet on an
interface
IC 4-266
ip ospf
dead-interval
Sets the interval at which hello packets are not
seen before neighbors declare the router down
IC 4-267
ip ospf
hello-interval
Specifies the interval between sending hello
packets
IC 4-268
ip ospf priority Sets the router priority used to determine the
designated router
IC 4-268
ip ospf
retransmit-interval
Specifies the time between resending a
link-state advertisement
IC 4-269
ip ospf
transmit-delay
Estimates time to send a link-state update
packet over an interface
IC 4-270
Display Information
show ip ospf Displays general information about the routing
processes
PE 4-271
show ip ospf
border-routers
Displays routing table entries for Area Border
Routers (ABR) and Autonomous System
Boundary Routers (ASBR)
PE 4-272
show ip ospf
database
Shows information about different LSAs in the
database
PE 4-273
show ip ospf
interface
Displays interface information PE 4-281
show ip ospf
neighbor
Displays neighbor information PE 4-282
Command Function Mode Page