24-Port Layer 3 Switch Management Guide

M ULTICAST F ILTERING C OMMANDS
4-201
IGMP Query Commands (Layer 2)
ip igmp snooping querier
Use this command to enable the switch as an IGMP querier. Use the no
form to disable it.
Syntax
ip igmp snooping querier
no ip igmp snooping querier
Default Setting
Enabled
Command Mode
Global Configuration
Command Usage
If enabled, the switch will serve as querier if elected. The querier is
responsible for asking hosts if they want to receive multicast traffic.
Example
Command Function Mode Page
ip igmp snooping
querier
Allows this device to act as the querier for
IGMP snooping
GC 4-201
ip igmp snooping
query-count
Configures the query count GC 4-202
ip igmp snooping
query-interval
Configures the query interval GC 4-203
ip igmp snooping
query-max-response-
time
Configures the report delay GC 4-203
ip igmp snooping
router-port-expire-
time
Configures the query timeout GC 4-204
Console(config)#ip igmp snooping querier
Console(config)#