24-Port Layer 3 Switch Management Guide

M ULTICAST F ILTERING C OMMANDS
4-199
Example
The following configures the switch to use IGMP Version 1:
show ip igmp snooping
Use this command to show the IGMP snooping configuration.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
See “Configuring IGMP Snooping Parameters” on page -137 for a
description of the displayed items.
Example
The following shows the current IGMP snooping configuration:
Console(config)#ip igmp snooping version 1
Console(config)#
Console#show ip igmp snooping
Service status: Enabled
Querier status: Enabled
Query count: 2
Query interval: 125 sec
Query max response time: 10 sec
Query time-out: 300 sec
IGMP snooping version: Version 2
Console#