24-Port Layer 3 Switch Management Guide

C
OMMAND
L
INE
I
NTERFACE
4-162
VLAN Commands
A VLAN is a group of ports that can be located anywhere in the network,
but communicate as though they belong to the same physical segment.
This section describes commands used to create VLAN groups, add port
members, specify how VLAN tagging is used, and enable automatic
VLAN registration for the selected interface.
Editing VLAN Groups
vlan database
Use this command to enter VLAN database mode. All commands in this
mode will take effect immediately.
Default Setting
None
Command Groups Function Page
Editing VLAN
Groups
Sets up VLAN groups, including name, VID and
state
4-162
Configuring VLAN
Interfaces
Configures VLAN interface parameters, including
ingress and egress tagging mode, ingress filtering,
PVID, and GVRP
4-164
Displaying VLAN
Information
Displays VLAN groups, status, port members, and
MAC addresses
4-172
Configuring Private
VLANs
Configures private VLANs, including uplink and
downlink ports
4-173
Command Function Mode Page
vlan database Enters VLAN database mode to add,
change, and delete VLANs
GC 4-162
vlan Configures a VLAN, including VID, name
and state
VC 4-163