24-Port Layer 3 Switch Management Guide

C OMMAND L INE I NTERFACE
4-146
Spanning Tree Commands
This section includes commands that configure the Spanning Tree
Algorithm (STA) globally for the switch, and commands that configure
STA for the selected interface.
Command Function Mode Page
spanning-tree Enables the spanning tree protocol GC 4-147
spanning-tree mode Configures STP or RSTP mode GC 4-148
spanning-tree
forward-time
Configures the spanning tree bridge
forward time
GC 4-149
spanning-tree
hello-time
Configures the spanning tree bridge hello
time
GC 4-150
spanning-tree
max-age
Configures the spanning tree bridge
maximum age
GC 4-150
spanning-tree priority Configures the spanning tree bridge priority GC 4-151
spanning-tree
path-cost method
Configures the path cost method for RSTP GC 4-152
spanning-tree
transmission-limit
Configures the transmission limit for RSTP GC 4-153
spanning-tree cost Configures the spanning tree path cost of
an interface
IC 4-154
spanning-tree
port-priority
Configures the spanning tree priority of an
interface
IC 4-155
spanning-tree
edge-port
Enables fast forwarding for edge ports IC 4-156
spanning-tree
portfast
Sets an interface to fast forwarding IC 4-157
spanning-tree
link-type
Configures the link type for RSTP IC 4-158
spanning-tree
protocol-migration
Re-checks the appropriate BPDU format PE 4-159
show spanning-tree Shows spanning tree configuration for the
overall bridge or a selected interface
PE 4-160