24-Port Layer 3 Switch Management Guide

C OMMAND L INE I NTERFACE
4-110
Default Setting
None
Command Mode
DHCP Pool Configuration
Example
Related Commands
next-server (4-109)
netbios-name-server
Use this command to configure NetBIOS Windows Internet Naming
Service (WINS) name servers that are available to Microsoft DHCP
clients. Use the no form to remove the NetBIOS name server list.
Syntax
netbios-name-server address1 [address2]
no netbios-name-server
• address1 - Specifies IP address of primary NetBIOS WINS name
server.
• address2 - Specifies IP address of alternate NetBIOS WINS name
server.
Default Setting
None
Command Mode
DHCP Pool Configuration
Usage Guidelines
Servers are listed in order of preference (starting with address1 as the
most preferred server).
Console(config-dhcp)#bootfile wme.bat
Console(config-dhcp)#