24-Port Layer 3 Switch Management Guide
DHCP C
OMMANDS
4-107
Command Mode
DHCP Pool Configuration
Usage Guidelines
The IP address of the router should be on the same subnet as the
client. You can specify up to two routers. Routers are listed in order of
preference (starting with address1 as the most preferred router).
Example
domain-name
Use this command to specify the domain name for a DHCP client. Use the
no form to remove the domain name.
Syntax
domain-name domain
no domain-name
domain - Specifies the domain name of the client.
(Range: 1-32 characters)
Default Setting
None
Command Mode
DHCP Pool Configuration
Example
Console(config-dhcp)#default-router 10.1.0.54 10.1.0.64
Console(config-dhcp)#
Console(config-dhcp)#domain-name sample.com
Console(config-dhcp)#