24-Port Layer 3 Switch Management Guide

DHCP C OMMANDS
4-103
service dhcp
Use this command to enable the DHCP server on this switch. Use the no
form to disable the DHCP server.
Syntax
service dhcp
no service dhcp
Default Setting
Enabled
Command Mode
Global Configuration
Example
clear ip dhcp
binding
Deletes an automatic address binding from the
DHCP server database
PE 4-116
show ip dhcp
binding
Displays address bindings on the DHCP
server
PE, NE 4-117
* These commands are used for manually binding an address to a client.
Console(config)#service dhcp
Console(config)#
Command Function Mode Page