24-Port Layer 3 Switch Management Guide

SNMP C
OMMANDS
4-91
Default Setting
public - Read-only access. Authorized management stations are only
able to retrieve MIB objects.
private - Read/write access. Authorized management stations are able
to both retrieve and modify MIB objects.
Command Mode
Global Configuration
Command Usage
The first snmp-server community command you enter enables SNMP
(SNMPv1). The no snmp-server community command disables SNMP.
Example
snmp-server contact
Use this command to set the system contact string. Use the no form to
remove the system contact information.
Syntax
snmp-server contact string
no snmp-server contact
string - String that describes the system contact information.
(Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Console(config)#snmp-server community alpha rw
Console(config)#
Console(config)#snmp-server contact Paul
Console(config)#