24-Port Layer 3 Switch Management Guide

C OMMAND L INE I NTERFACE
4-86
• any – Any MAC source address, destination address, or Ethernet
protocol.
• source – Source MAC address.
• source bitmask – Binary mask for the source MAC address.
• destination – Destination MAC address.
• destination bitmask – Binary mask for the destination MAC address.
• protocol – A specific Ethernet protocol number. (Range: 0-65535)
Default Setting
None
Command Mode
MAC ACL
Command Usage
• New rules are added to the end of the list.
•The ethertype option can only be used to filter Ethernet II formatted
packets.
• A detailed listing of Ethernet protocol types can be found in RFC
1060. A few of the more common types include the following:
- 0800 - IP
- 0806 - ARP
- 8137 - IPX
Example
This rule permits packets from any source MAC address to the destination
address 00-e0-29-94-34-de where the Ethernet type is 0800.
Related Commands
access-list mac (4-84)
Console(config-mac-acl)#permit any host 00-e0-29-94-34-de
ethertype 0800
Console(config-mac-acl)#