24-Port Layer 3 Switch Management Guide

C OMMAND L INE I NTERFACE
4-74
Access Control List Commands
Access Control Lists (ACL) provide packet filtering for IP frames (based
on address, protocol, TCP/UDP port number or TCP control code) or
non-IP frames (based on MAC address or Ethernet type). To filter
incoming packets, first create an access list, add the required rules, and
then bind the list to a specific port.
An ACL is a sequential list of permit or deny conditions that apply to IP
addresses, MAC addresses, or other more specific criteria. This switch tests
incoming packets against the conditions in an ACL one by one. If a list
contains all permit rules, a packet will be accepted as soon as it passes any
of the rules. If a list contains all deny rules, then a packet will be rejected as
soon as it fails any one of the rules. In other words, if no rules match for a
permit list, the packet is dropped; and if no rules match for a deny list, the
packet is accepted.
802.1X Port Details
802.1X is disabled on port 1
.
.
.
802.1X is enabled on port 26
Max request 2
Quiet period 350
Reauth period 300
Tx period 300
Status Unauthorized
Port-control Auto
Supplicant 00-00-00-00-00-00
Authenticator State Machine
State Connecting
Reauth Count 3
Backend State Machine
State Idle
Request Count 0
Identifier(Server) 0
Reauthentication State Machine
State Initialize
Console#