24-Port Layer 3 Switch Management Guide
A
UTHENTICATION
C
OMMANDS
4-71
Default
3600 seconds
Command Mode
Global Configuration
Example
dot1x timeout tx-period
Sets the time that the switch waits during an authentication session before
re-transmitting an EAP packet. Use the no form to reset to the default
value.
Syntax
dot1x timeout tx-period seconds
no dot1x timeout tx-period
seconds - The number of seconds. (Range: 1-65535)
Default
30 seconds
Command Mode
Global Configuration
Example
Console(config)#dot1x timeout re-authperiod 300
Console(config)#
Console(config)#dot1x timeout tx-period 300
Console(config)#