24-Port Layer 3 Switch Management Guide

C OMMAND L INE I NTERFACE
4-62
radius-server host
Use this command to specify the RADIUS server. Use the no form to
restore the default.
Syntax
radius-server host host_ip_address
no radius-server host
host_ip_address - IP address of server.
Default Setting
10.1.0.1
Command Mode
Global Configuration
Example
radius-server
retransmit
Sets the number of retries GC 4-64
radius-server timeout Sets the interval between sending
authentication requests
GC 4-65
show radius-server Shows the current RADIUS settings PE 4-65
Console(config)#radius-server host 192.168.1.25
Console(config)#
Command Function Mode Page