24-Port Layer 3 Switch Management Guide

C OMMAND L INE I NTERFACE
4-60
Authentication Commands
You can configure this switch to authenticate users logging into the system
for management access using local or RADIUS authentication methods.
You can also enable port-based authentication for network client access
using IEEE 802.1x.
Authentication Sequence
authentication login
Use this command to define the login authentication method and
precedence. Use the no form to restore the default.
Syntax
authentication login {[local] [radius]}
no authentication login
• local - Use local password only.
• radius - Use RADIUS server password only.
Default Setting
Local
Command Group Function Page
Authentication
Sequence
Defines logon authentication method and
precedence
4-60
RADIUS Client Configures settings for authentication via a remote
server
4-62
Port Authentication Configures host authentication on specific ports
using 802.1x
4-67
Command Function Mode Page
authentication login Defines logon authentication method and
precedence
GC 4-60