24-Port Layer 3 Switch Management Guide

OMMAND

INE

NTERFACE

4-54

Syntax

copy file {file | running-config | startup-config | tftp}

copy running-config {file | startup-config | tftp}

copy startup-config {file | running-config | tftp}

copy tftp {file | running-config | startup-config}

• file - Keyword that allows you to copy to/from a file.

• running-config - Keyword that allows you to copy to/from the

current running configuration.

• startup-config - The configuration used for system initialization.

• tftp - Keyword that allows you to copy to/from a TFTP server.

Default Setting

None

Command Mode

Privileged Exec

Command Usage

• The system prompts for data required to complete the copy command.

• The destination file name should not contain slashes (\ or /), the

leading letter of the file name should not be a period (.), and the

maximum length for file names on the TFTP server is 127 characters

or 31 characters for files on the switch. (Valid characters: A-Z, a-z, 0-9,

“.”, “-”, “_”)

• Due to the size limit of the flash memory, the switch supports only two

operation code files.

• The maximum number of user-defined configuration files depends on

available memory.

• You can use “Factory_Default_Config.cfg” as the source to copy from

the factory default configuration file, but you cannot use it as the

destination.

• To replace the startup configuration, you must use startup-config as

the destination.

• The Boot ROM and Loader cannot be uploaded or downloaded from

the TFTP server. You must use a direct console connection and access