24-Port Layer 3 Switch Management Guide

S
YSTEM
M
ANAGEMENT
C
OMMANDS
4-47
a time corresponding to your local time, you must indicate the number
of hours and minutes your time zone is east (before) or west (after) of
UTC.
Example
Related Commands
show sntp (4-45)
System Status Commands
show startup-config
Use this command to display the configuration file stored in non-volatile
memory that is used to start up the system.
Default Setting
None
Command Mode
Privileged Exec
Console(config)#clock timezone Japan hours 8 minute 0 after-UTC
Console(config)#
Command Function Mode Page
show
startup-config
Displays the contents of the configuration file
(stored in flash memory) that is used to start up
the system
PE 4-47
show
running-config
Displays the configuration data currently in use PE 4-49
show system Displays system information NE,
PE
4-51
show users Shows all active console and Telnet sessions,
including user name, idle time, and IP address of
Telnet clients
NE,
PE
4-51
show version Displays version information for the system NE,
PE
4-52