24-Port Layer 3 Switch Management Guide
S
YSTEM
M
ANAGEMENT
C
OMMANDS
4-35
Command Usage
• You cannot set a null password. You will have to enter a password to
change the command mode from Normal Exec to Privileged Exec
with the enable command (page 4-25).
• The encrypted password is required for compatibility with legacy
password settings (i.e., plain text or encrypted) when reading the
configuration file during system bootup or when downloading the
configuration file from a TFTP server. There is no need for you to
manually configure encrypted passwords.
Example
Related Commands
enable (4-25)
Web Server Commands
ip http port
Use this command to specify the TCP port number used by the Web
browser interface. Use the no form to use the default port.
Syntax
ip http port port-number
no ip http port
port-number - The TCP port to be used by the browser interface.
(Range: 1-65535)
Console(config)#enable password level 15 0 admin
Console(config)#
Command Function Mode Page
ip http port Specifies the port to be used by the Web
browser interface
GC 4-35
ip http server Allows the switch to be monitored or
configured from a browser
GC 4-36