24-Port Layer 3 Switch Management Guide

G ENERAL C OMMANDS
4-27
configure
Use this command to activate Global Configuration mode. You must enter
this mode to modify any settings on the switch. You must also enter
Global Configuration mode prior to enabling some of the other
configuration modes, including Interface Configuration, Line
Configuration, and VLAN Database Configuration. See “Understanding
Command Modes” on page 4-6.
Default Setting
None
Command Mode
Privileged Exec
Example
Related Commands
end (4-29)
show history
Use this command to show the contents of the command history buffer.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
The history buffer size is fixed at 10 Execution commands and
10 Configuration commands.
Console#configure
Console(config)#