24-Port Layer 3 Switch Management Guide

C OMMAND L INE I NTERFACE
4-12
The access mode shown in the following tables is indicated by these
abbreviations:
NE (Normal Exec) IC (Interface Configuration)
PE (Privileged Exec) LC (Line Configuration)
GC (Global Configuration) RC (Router Configuration)
ACL (Access Control List Config.) VC (VLAN Database Configuration)
DC (DHCP Server Configuration)
Spanning Tree Configures Spanning Tree settings for the switch 4-146
VLANs Configures VLAN settings, and defines port
membership for VLAN groups; also enables or
configures private VLANs
4-162
GVRP and
Bridge Extension
Configures GVRP settings that permit automatic
VLAN learning; shows the configuration for the
bridge extension MIB
4-175
Priority Sets port priority for untagged frames, relative weight
for each priority queue, also sets priority for TCP
traffic types, IP precedence, and DSCP
4-181
Multicast Filtering Configures IGMP multicast filtering, query
parameters, and specifies ports attached to a multicast
router
4-196
IP Interface Configures IP address for the switch interfaces; also
configures ARP parameters and static entries
4-215
IP Routing Configures static and dynamic unicast routing 4-225
Multicast Routing Configures multicast routing protocols DVMRP and
PIM-DM
4-285
Command Group Description Page