24-Port Layer 3 Switch Management Guide

IP R OUTING
3-191
Web - Click Routing Protocol, OSPF, General Configuration. Enable
OSPF, specify the Router ID, configure the other global parameters as
required, and click Apply.
CLI - This example configures the router with the same settings as shown
in the screen capture for the Web interface.
Console(config)#router ospf 4-246
Console(config-router)#router-id 10.1.1.253 4-247
Console(config-router)#no compatible rfc1583 4-248
Console(config-router)#default-information originate always
metric 10 metric-type 2 4-248
Console(config-router)#timers spf 10 4-250
Console(config-router)#