24-Port Layer 3 Switch Management Guide

C
ONFIGURING
THE
S
WITCH
3-114
Web – Open VLAN, VLAN Static Membership. Select an interface from
the scroll-down box (Port or Trunk). Click Query to display membership
information for the interface. Select a VLAN ID, and then click Add to
add the interface as a tagged member, or click Remove to remove the
interface. After configuring VLAN membership for each interface, click
Apply.
CLI – This example adds Port 3 to VLAN 1 as a tagged port, and removes
Port 3 from VLAN 2.
Configuring VLAN Behavior for Interfaces
You can configure VLAN behavior for specific interfaces, including the
default VLAN identifier (PVID), accepted frame types, ingress filtering,
GVRP status, and GARP timers.
Command Usage
GVRP – GARP VLAN Registration Protocol defines a way for switches
to exchange VLAN information in order to automatically register VLAN
members on interfaces across the network.
GARP – Group Address Registration Protocol is used by GVRP to
register or deregister client attributes for client services within a bridged
LAN. The default values for the GARP timers are independent of the
Console(config)#interface ethernet 1/3 4-119
Console(config-if)#switchport allowed vlan add 1 tagged 4-170
Console(config-if)#switchport allowed vlan remove 2