User's Manual

C ONSOLE I NTERFACE
4-28
Configuring Address Filtering
Use the Filtering MAC Address page to drop traffic from unwanted
stations based on the source MAC address (and associated VLAN if
tagged VLANs are enabled).
Field Attributes
• MAC Address – Source MAC address.
•Vlan ID – ID of configured VLAN (1-4094). This option is only
available if IEEE 802.1Q tagged VLANs are enabled (page 4-22).
Console – Click Switch Static Configuration
=> MAC Address
Configuration
=> Filtering MAC Address. Click <Add> to open the Add
Filter MAC Address page. Enter a MAC address and associated VLAN,
then save your settings.
After you configure a new address, it will be displayed on the Filter MAC
Address Configuration page as shown below.
TigerSwitch 10/100 : Add Filter MAC Address
=====================
Mac Address :00E0299434DE
Vlan ID :2
actions-> <Edit> <Save> <Quit>
Save successfully!Press any key to return!
Arrow/TAB/BKSPC = Move Item Quit = Previous menuu Enter = Select Itemm
TigerSwitch 10/100 : Filter MAC Address Configuration
=====================
Mac Address Vlan ID Mac Address Vlan ID
------------------------------- -------------------------------
00E0299434DE 2
actions-> <Add> <Edit> <Delete> <Save> <Quit>
Add/Edit/Delete filter MAC addresses.
Arrow/TAB/BKSPC = Move Item Quit = Previous menu Enter = Select Item