User's Manual

M AIN M ENU
4-5
Filtering MAC
Address
Filters specified addresses 4-28
Misc Configuration 4-29
Port Security Enables and disables address learning 4-30
MAC Age Interval Sets the address aging time 4-31
Broadcast Storm
Filtering
Sets the threshold above which broadcast
traffic will be filtered
4-32
Max bridge transmit
delay bound
Sets the maximum overall queue delay, and
low-priority queue delay
4-33
Protocol Related
Configuration
4-34
STP Configures the Spanning Tree Protocol 4-35
STP Enable/Disable Enables/disables Spanning Tree Protocol 4-36
System Configuration Configures global bridge parameters for STP 4-38
Perport
Configuration
Configures port-specific parameters for STP 4-40
SNMP Configures SNMP management access 4-42
System Options Provides basic system description, including
contact information
4-43
Community Strings Configures community strings 4-44
Trap Managers Sets trap management stations 4-45
GVRP Enables/disables automatic VLAN
registration via GVRP
4-46
LACP Configures dynamic trunks; displays status 4-47
Aggregator Setting Configures dynamic trunks 4-48
State Activity Actively or passively configures a trunk 4-49
LACP Status Shows trunks and associated ports, and
detailed information for dynamic links
4-50
Reboot Switch Reboots the switch, or resets to defaults 4-52
Set Logout Timer Sets the timeout for the console menu 4-53
Command Line Enters the command line interface 5-1
Menu Description Page