User's Manual

P ORT C ONFIGURATION ( PORT )
5-5
Port Configuration (port)
The port configuration commands include the following items.
Port Settings
config ports <1~10> state [on|off] auto [on|off] speed [10|100|1000] duplex [half|full]
fctl [on|off]
Configures connection parameters for the specified port(s).
state – Enables or disables the connection.
auto – Enables or disables auto-negotiation.
speed – Sets connection to 10, 100 or 1000 Mbps
duplex – Sets connection to half or full duplex.
fctl – Enables or disables flow control.
show portstatus <1~10>
Displays connection settings for the specified port(s).
Port Statistics
show statistics <1~10>
Displays network statistics for the specified port(s).
Port Security
enable security <1~10>
Locks address learning for the specified port(s).
disable security <1~10>
Unlocks address learning for the specified port(s).
show security
Shows the port security settings for all ports.