User's Manual

C ONSOLE I NTERFACE
4-36
Enabling STP
To configure STP, first enable it using the STP Enable/Disable page.
Console – Click Protocol Related Configuration
=> STP => STP Enable/
Disable. Enable the STP Protocol, and save your settings.
Displaying Information About the Root Bridge
Use the System Configuration page to display the root bridge settings.
The root bridge of the spanning tree is selected whenever the network is
reconfigured. The root bridge is uniquely identified in the spanning tree by
its priority and MAC address. The maximum age, hello time, and forward
delay currently used by all bridges in the spanning tree are set to those
values configured on the root bridge.
Field Attributes
• Priority – Bridge priority for the root device.
• MAC Address – MAC address of the root device.
• Root Path Cost – The path cost from the root port on this switch to the
root device.
• Root Port – The number of the port on this switch that is closest to the
root. This switch communicates with the root device through this port.
TigerSwitch 10/100 : STP Enabled/Disabled Configuration
=====================
STP :Enabled
actions-> <Edit> <Save> <Quit>
Select the action menu.
Arrow/TAB/BKSPC = Move Item Quit = Previous menuu Enter = Select Itemm