EZ Connect TM Wireless Access Point u u u u u u u Protocol-independent networking functionality 11 Mbps data rate per channel: provides alternative for wired LANs that can dramatically cut costs Coverage area 590ft (180m) at 11 Mbps, 1800ft (550m) at 1 Mbps Seamless connectivity to wired Ethernet LANs augments existing networks quickly and easily Direct Sequence Spread-Spectrum (DSSS) technology provides robust, and secure wireless connection Easy installation Dual dipole antenna User Guide SMC2655W SM
EZ Connect Wireless Access Point User Guide The easy way to make all your network connections 6 Hughes Irvine, CA 92618 Phone: 1-800-SMC-4-YOU 01-111263-001
Copyright Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SMC. SMC reserves the right to change specifications at any time without notice. Copyright © 2001 by SMC Networks, Inc. Irvine, California. All rights reserved.
TABLE OF CONTENTS The EZ Connect Wireless Access Point 1 SMC2655W ................................................. 1 Package Checklist ....................................... 2 Hardware Description ............................... 2 Applications .................................................... 3 LED Indicator ................................................ 4 System Requirements .................................... 4 Installation ...................................................... 5 SMCPWR-INJ* ..
EZ CONNECT WIRELESS ACCESS POINT SMC2655W SMCs EZ Connect Wireless Access Point is an 11 Mbps wireless repeater that seamlessly integrates with existing Ethernet networks to support applications such as mobile users or temporary conferences. This solution offers fast, reliable wireless connectivity with considerable cost savings over wired LANs (which include long-term maintenance overhead for cabling.
EZ CONNECT W IRELESS A CCESS P OINT Package Checklist EZ Connect Wireless Access Point package includes: 1 EZ Connect Wireless Access Point with dual dipole antenna (SMC2655W) 1 9V DC power adapter 1 utility diskette This User Guide Please register this product and upgrade product warranty at www.smc.com. Please inform your dealer if there are any incorrect, missing or damaged parts. If possible, retain the carton, including the original packing materials.
EZ CONNECT W IRELESS A CCESS P OINT Applications The EZ Connect Wireless products offer a fast, reliable, cost-effective solution for wireless client access to the network in applications such as: Remote access to corporate network information E-mail, file transfer and terminal emulation Difficult-to-wire environments Historical or old buildings, asbestos installations, and open areas where wiring is difficult to employ Frequently changing environments Retailers, manufacturers and banks who freq
EZ CONNECT W IRELESS A CCESS P OINT LED Indicators The EZ Connect Wireless Access Point includes three status LED indicators, as described in the following figure and table. System Requirements Before you install the EZ Connect Wireless Access Point, be sure you can meet the following requirements: 4 An A/C power outlet (100~240V, 50~60Hz) which will supply power for the access point An available RJ-45 (UTP) port on a 10BASE-T Ethernet hub or switch. 802.
EZ CONNECT W IRELESS A CCESS P OINT INSTALLATION 1. Select the Site - Choose a proper place for your SMC2655W Access Point. In general, the best location to place the access point is at the center of your wireless coverage area, within line of sight to all your mobile stations. 2. Stand the Antenna - Stand the antenna. Proper placement will improve performance. Try to place the access point in a position that can best cover its BSS (refer to page 15).
EZ CONNECT W IRELESS A CCESS P OINT SMCPWR-INJ* POWER INJECTOR The PoE Power Injector allows the SMC2655W Access Point to receive power from the Ethernet cable. The Power Injector can be used with an Access Point that has limited access to a standard electric outlet. Follow these steps to install the Power Injector: 1. Connect the power adapter cable from the power supply to the Power Injector. 2. Plug the power cord into a power outlet. The Power Injectors LED will light up. 3.
EZ CONNECT W IRELESS A CCESS P OINT CONFIGURATION Your SMC2655W is a Plug and Play device. This means that, in most cases, you will not need to configure it. The SMC2655W Access Point includes an SNMP agent accessible through an SNMP manager application (EZ Connect Wireless AP Manager). The SNMP agent supports read-write and readonly modes. If you are adding this device into an already existing wireless network, or if you need to configure some advanced settings, follow the instructions below.
EZ CONNECT W IRELESS A CCESS P OINT 8 2. When you run the installed utility, click on Command and then select Scan from the menu. The program will then detect all the SMC2655Ws wired to the Ethernet network. 3. From the list of detected SMC2655Ws, select and double click on the unit you want to configure. A message box will examine your password. 4. Please enter your password: MiniAP This will let you connect to SMC2655W. 5.
EZ CONNECT W IRELESS A CCESS P OINT The Configure AP screen displays AP status and settings shown above and you can configure the settings. BSS ID - Media Access Control (MAC) address. Regulation Domain - Different countries have different Regulation Domains which allow only specific radio frequencies. WEP - WEP (Wired Equivalent Privacy) Disabled/ Enabled status. Associated Stations - Amount of wireless client. Firmware Version - Here shows Firmware version.
EZ CONNECT W IRELESS A CCESS P OINT Accept ANY SSID - Checking this box will enable the Access Point to accept the association of wireless clients, using ANY as their SSID. If this feature is disabled(the box is not checked), the wireless clients must use the same SSID as the Access Point(thus enhancing security). IP Address - Set the IP address as required. (Default: 192.168.0.254) Note: The available IP address settings as follows: Subnet Mask - Set the Subnet Mask as required. (Default: 255.255.
EZ CONNECT W IRELESS A CCESS P OINT Encryption - Click Encryption button for the WEP setting. WEP - For more secure data transmission, set the 64-Bit or 128-Bit to ensure wireless network security. Wired Equivalent Privacy (WEP) is implemented in this device to prevent unauthorized access to your wireless network. The 128-Bit setting gives a higher level of security but the setting must be the same as other clients in your wireless network.
EZ CONNECT W IRELESS A CCESS P OINT In the Set MAC Filter screen, you can decide which wireless devices are allowed to connect to the Access Point by controlling the MAC address. Other wireless devices which are not in the table will be rejected by the Access Point. Filtering - Choose Enabled to enable MAC Filter. (Default: Disabled) Key in the MAC address which you prefer. Note: The format is 12 hexadecimal digits. e.g. 0090D112AB89.
EZ CONNECT W IRELESS A CCESS P OINT Otherwise click Add from File... to add a text file which contains MAC address similar to the below table and then click Save to save the changes. Note: The table allows you to set a maximum of 20 MAC addresses. In the Change Password screen you may change the password on the Access Point. A password is required to configure the SMC2655W. We suggest changing your password from the default value to ensure network security.
EZ CONNECT W IRELESS A CCESS P OINT The Reload Default screen will let you reload the factory default setting. Please refer to the table below for default values. The Reset AP screen will let you reboot the Access Point. The Update Firmware screen allows you to upgrade the firmware of Access Point. Enter the file name or browse for the file containing the updated firmware.
EZ CONNECT W IRELESS A CCESS P OINT NETWORK CONFIGURATION AND PLANNING SMCs EZ Connect Wireless Solution supports a stand-alone wireless network configuration, as well as an integrated configuration with 10Mbps Ethernet LANs.
EZ CONNECT W IRELESS A CCESS P OINT Infrastructure Wireless LAN The SMC2655W can also provide access to a wired LAN for wireless workstations. An integrated wired and wireless LAN is called an Infrastructure configuration. A Basic Service Set (BSS) consists of a group of wireless PC users, and an access point that is directly connected to the wired LAN.
EZ CONNECT W IRELESS A CCESS P OINT Setting the Communication Domain Stationary Wireless PCs The Basic Service Set (BSS) is the communication domain for each SMC2655W access point. For wireless PCs that do not need to support roaming, set the domain identifier (SSID) for the wireless card to the BSS ID of the access point you want to connect to. Check with your administrator for the BSS ID of the SMC2655W access point he wants you to connect to.
EZ CONNECT W IRELESS A CCESS P OINT TROUBLESHOOTING Check the following items before contacting SMC Technical Support. 1. If mobile users do not have roaming access to the SMC2655W access point, check the following: Make sure that all the SMC2655Ws and stations in the ESS in which the WLAN mobile users can roam are configured to the same WEP setting, SSID and authentication algorithm. 2. If you can not connect to SMC2655W by utility: Make sure that your local IP domain conform to the SMC2655W. 3.
EZ CONNECT W IRELESS A CCESS P OINT SMC Networks 802.11b Wireless Access Point SMC2655W Maximum Distance Table Important Notice: Maximum distances posted below are actual tested distance thresholds. However, there are many variables such as barrier composition and construction and local environmental interference that may impact your actual distances and cause you to experience distance thresholds far lower than those we post below.
EZ CONNECT W IRELESS A CCESS P OINT COMPLIANCES FCC Class B Certification 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Warning! This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
EZ CONNECT W IRELESS A CCESS P OINT CSA Statement (Canada) This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of Industry Canada. Le présent appareil numérique német pas de bruits radio-électriques dépassant les limites applicables aux appareils numériques de la classe B prescrites dens le Règlement sur le brouillage radioélectrique édicté par lIndustrie.
EZ CONNECT W IRELESS A CCESS P OINT SPECIFICATIONS Model SMC2655W Maximum Channels US & Canada: 11, Europe (ETSI): 13, Japan: 14 Maximum Clients 64 Operating Range Maximum Maximum Maximum Maximum distance of 11Mbps: 180m (590ft) distance of 5.5Mbps: 300m (984ft) distance of 2Mbps: 450m (1476ft) distance of 1Mbps: 550m (1800ft) Cell Separation (for roaming clients) 200ft (60m) between access points Data Rate 1, 2, 5.
EZ CONNECT W IRELESS A CCESS P OINT Physical Size 5.4 x 4.25 x 1.18 in, (13.73 x 10.8 x 3.01 cm) Weight 7.4 oz (210 grams) LED Indicators Power, Ethernet Link/Activity, Wireless Activity Network Management Windows 98/Me/NT/2000 SNMP Management Utility Operating System Windows 98/Me/NT/2000 Encryption 64-bit/128-bit key Compliances CE Mark EN55022 Class B EN55024 IEC 61000-42/3/4/6/11 FCC Part 15(B) Emissions ETS 300 328 RCR STD-33A Safety CSA/NTRL (CSA 22.2 No.
EZ CONNECT W IRELESS A CCESS P OINT Model SMCPWR-INJ Input Voltage 7Vdc~35Vdc RJ45 Port Pin Assignments (for AP) 4/5(+), 7/8(-) Output Voltage Input voltage Size 2.25 x 2 x 1 in Connectors Two RJ-45 Connectors; One labeled Access Point and one labeled Network Weight 2.
EZ CONNECT W IRELESS A CCESS P OINT TERMINOLOGY The following is a list of terminology that is used in this document. Access Point - An internetworking device that seamlessly connects wired and wireless networks. Ad-Hoc - An Ad-Hoc wireless LAN is a group of computers each with LAN adapters, connected as an independent wireless LAN. Backbone - The core infrastructure of a network.
EZ CONNECT W IRELESS A CCESS P OINT Roaming - A wireless LAN mobile user moves around an ESS and maintains a continuous connection to the Infrastructure network. RTS Threshold Transmitters contending for the medium may not be aware of each other. RTS/ CTS mechanism can solve this Hidden Node Problem. If the packet size is smaller than the preset RTS Threshold size, the RTS/CTS mechanism will NOT be enabled.
FOR TECHNICAL SUPPORT, CALL: From U.S.A. and Canada (24 Hours a day, 7 Days a Week) (800) SMC-4-YOU; (949) 707-2400; (949) 707-2460 (Fax) From Europe (8:00 AM - 5:30 PM UK Greenwich Mean Time) 44 (0) 1189748740; 44 (0) 1189748741 (Fax) INTERNET E-mail addresses: techsupport@smc.com european.techsupport@smc-europe.com Driver updates: http://www.smc.com/support.html World Wide Web: http://www.smc.com/ FTP Site: ftp.smc.com FOR LITERATURE OR ADVERTISING RESPONSE, CALL: U.S.A.
