User's Manual

41
Appendix A: Default Settings
TIP: Press the Default button on the powered-on SMC2585W-G to reset the configuration
settings to factory-default values.
Setting Name Default Value
Global
User Name admin
Password smcadmin
Host Name SMC2585W-G
IEEE 802.11g
Operational Mode Access Point
Policy Mixed (Both IEEE 802.11b- and IEEE
802.11g-based wireless clients are sup-
ported.)
Regulatory Domain FCC (U.S.) or ETSI (Europe)
Channel Number 6/11
SSID SMC1/2
SSID Broadcasts Enabled
Transmission Rate Auto
Transmit Power High
MAC Address See the label on the housing of the
SMC2585W-G.
Security Mode Open System
WEP Key Length 64 Bits
Selected WEP Key Key #1
WEP Key #1 00-00-00-00-00
WEP Key #2 00-00-00-00-00
WEP Key #3 00-00-00-00-00
WEP Key #4 00-00-00-00-00
MAC-Address-Based Access
Control
Disabled
Access Control Table Type Inclusive
Wireless Client Isolation Disabled
Link Integrity Disabled
LAN Interface
Method of obtaining an IP Address DHCP Client enabled
IP Address 192.168.2.50 (If a DHCP server cannot
be found.)
Subnet Mask 255.255.255.0 (If a DHCP server cannot
be found.)
Default Gateway 0.0.0.0
DHCP Server Disabled
Management
Web Admin Idle Timeout 5 min
UPnP Enabled
Device Friendly Name SMC2585W-G
System Log Local Log
SNMP Enabled
SNMP Read Community public
SNMP Write Community private
Telnet Disabled