Network Router User Manual

Configuring the EZ-Stream Wireless Router

FIREWALL

The Router firewall can provide access control of connected client

PCs, block common hacker attacks, including IP Spoofing, Land

Attack, Ping of Death, IP with zero length, Smurf Attack, UDP port

loopback, Snork Attack, TCP null scan, and TCP SYN flooding. The

firewall does not significantly affect system performance, so we

advise enabling it to protect your network users.

To enable the Stateful Packet Inspection (SPI) firewall, click on the

“FIREWALL” link in the side navigation bar, select the “Enable”

option and click the “SAVE SETTINGS” button.

Access Control

Using this option allows you to specify different privileges based on IP

address for the client PCs.

Note: Click on Add PC and define the appropriate settings

for client PC services (as shown in the following

screen).