Network Router User Manual

ADVANCED SETUP

Point-to-Point Tunneling Protocol (PPTP)

Point-to-Point Tunneling Protocol (PPTP) can be used to join different

physical networks using the Internet as an intermediary. Using the

above screen allows client PCs to establish a normal PPTP session and

provides hassle-free configuration of the PPTP client on each client

PC.

Enter the assigned IP address, subnet mask and default gateway IP

address (usually supplied by your ISP), and then the PPTP User ID,

Password and PPPTP Gateway IP address.

Enter a maximum Idle Time Out (in minutes) to define a maximum

period of time for which the PPTP connection is maintained during

inactivity. If the connection is inactive for longer than the Maximum

Idle Time, it will be dropped.

(Default: 10 minutes)

Manual-connect: This option will require that you click the “Renew”

button on the status page after the connection has timed out.