Network Router User Manual

ADVANCED SETUP

Dynamic IP

The Host Name is optional, but may be required by some ISPs. The

default MAC address is set to the WAN’s physical interface on the

Router. Use this address when registering for Internet service, and do

not change it unless required by your ISP. If your ISP used the MAC

address of an Ethernet card as an identifier when first setting up your

broadband account, only connect the PC with the registered MAC

address to the Router and click the Clone MAC Address button. This

will replace the current Router MAC address with the already

registered Ethernet card MAC address.

If you are unsure of which PC was originally set up by the broadband

technician, call your ISP and request that they register a new MAC

address for your account. Register the default MAC address of the

Router.