Network Router User Manual

ADVANCED SETUP
35
Password Settings
Use this menu to restrict access based on a password. (Default:
smcadmin) For security you should assign your administration
password before exposing the Router to the Internet.
Passwords can contain from 3–12 alphanumeric characters and are not
case sensitive.
Note: If your password is lost, or you cannot gain access to
the user interface, press the Reset button on the rear
panel (holding it down for at least five seconds) to
restore the factory defaults.
Enter a maximum Idle Time Out (in minutes) to define a maximum
period of time for which the login session is maintained during
inactivity. If the connection is inactive for longer than the maximum
idle time, it will perform system logout, and you have to log into the
web management system again.
(Default: 10 minutes)