Network Router User Manual

ADVANCED SETUP

BigPond

If you use the BigPond Internet Service which is available in Australia,

enter your Username, Password, and Authentication Service Name for

BigPond authentication. Click NEXT to complete the setup.

5.3 | ADVANCED SETUP

Use the web management interface to define system parameters,

manage and control the Router and its ports, or monitor network

conditions. The following table outlines the selections available from

this program.

Menu Description

Status Provides WAN connection type and status, firmware and

hardware version numbers, system IP settings, as well as DHCP,

NAT, and Firewall information.

Displays the number of attached clients, the firmware

versions, the physical MAC address for each media interface,

and the hardware version and serial number.

Shows the security and DHCP client log.

System Sets the local time zone, the password for administrator

access, and the IP address of a PC that will be allowed to

manage the Router remotely.

WAN Specifies the Internet connection type:

• Dynamic IP host configuration and the physical MAC address

of each media interface

• PPPoE configuration

• PPTP configuration

• Static IP and ISP gateway address

• BigPond (Internet service available in Australia)

• Specifies DNS servers to use for domain name resolution.

LAN Sets the TCP/IP configuration of the Router’s LAN interface and

all DHCP clients.