Network Router User Manual

Configuring the EZ-Stream Wireless Router
30
Enter a Maximum Idle Time (in minutes) to define a maximum period
of time for which the Internet connection is maintained during
inactivity. If the connection is inactive for longer than the Maximum
Idle Time, it will be dropped. (Default: 10)
Enable the Auto-reconnect option to automatically re-establish the
connection as soon as you attempt to access the Internet again. Click
NEXT to complete the setup.
Point-to-Point Tunneling Protocol (PPTP)
Point-to-Point Tunneling Protocol is a common connection method
used for xDSL connections in Europe. It can be used to join different
physical networks using the Internet as an intermediary.
If you have been provided with the information as shown on the
screen, enter the assigned IP address, subnet mask, default gateway
IP address, user ID and password, and PPTP Gateway.
Enter a maximum Idle Time Out (in minutes) to define a maximum
period of time for which the Internet connection is maintained during
inactivity. If the connection is inactive for longer than the Idle Time
Out, it will be dropped. (Default: 10)
Click NEXT to complete the setup. (Refer to “Point-to-Point Tunneling
Protocol (PPTP)” on page 41 for details.)