Network Router User Manual

Setting Up TCP/IP

3. Type IPCONFIG /RENEW and press the <ENTER> key. Verify that

your IP Address is now 192.168.2.xxx, your Subnet Mask is

255.255.255.0 and your Default Gateway is 192.168.2.254.

These values confirm that the Router is functioning

4. Type EXIT and press <ENTER> to close the Command Prompt

window.

Configuring Your Computer in Windows 2000

1. Access your Network settings by clicking Start, then choose

Settings and then select Control Panel.

2. In the Control Panel, locate and double-click the Network and

Dial-up Connections icon.

3. Locate and double-click the

Local Area Connection icon for

the Ethernet adapter that is

connected to the Router. When

the Status dialog box window

opens, click the Properties

button.