EZ USB Networking Cable User Guide SMC2004USB-Cable V1.
Welcome. Product Features: Congratulations on purchasing the SMC EZ Connect USB Cable. Very shortly you will have all of the benefits of having your own small network. The SMC EZ Connect USB cable has been designed to be easy to install and use. The SMC EZ Connect USB cable provides a quick and easy solution to network up to 17 USB computers via your USB ports without having to add any network interface cards. USB specification revision 1.
Step 1 Install the software on your computers – 1. Switch on the computers that you will connecting the SMC EZ Connect USB Cable and make sure that the USB ports are enabled and working properly. 2. Insert the SMC CD-Rom into the CD-ROM drive and find the installation program. (This should be in directory D:\SMC.exe) 6. During the installations, the system may ask you to insert system disk(i.e Win98 CD-ROM) please insert your system disk your CD-ROM drive then click OK. 7.
Step 2 Note: Start sharing files and Printers: Other people will only be able to share files that you select to be shared. Until you have chosen these files, other users will not be able to see any files or folders on your PC. Click the Start menu, point to Programs\Windows Explorer. a. Expand the desktop and select the drive, folder, file or printer you want to share. b. Move your mouse cursor and click right button on the resource. c. Select Sharing.
Step 4 TCP/IP Setup on Computer A Installing the SMC EZ connect USB Bridge Driver: When all installation processes are completed, you have to specify an IP address , Subnet Mask and Gateway on Computer A: The bridge computer is the main computer in the network. There can only be one Bridge computer in the network, It is very important when you are installing the software to only install the Bridge drivers on one of the computers. The InstallShield Wizard will pop-up a Question Window as shown below. 1.
Driver Uninstallation Follow the steps below to remove the the SMC EZ Connect USB Network Bridge driver from Windows system: 1. Click the Start menu, point to Settings\Control Panel. Double click Add/Remove Programs icon. 2. In Install/Uninstall tab, select SMC EZ Connect USB Network Bridge Driver V1.5.0.0 3. Click Add/Remove button and then click OK. 4. Restart Windows system.
FCC Statement This device generates and uses radio frequency and may cause interference to radio and television reception if not installed and used properly. This has been tested and found to comply with the limits of a Class B computing device in accordance with the specifications in Part 15 of FCC Rules. These specifications are designed to provide reasonable protection against such interference in a residential installation.
