24-Port Fast Ethernet Switch Management Guide

M ULTICAST F ILTERING C OMMANDS
4-274
Default Setting
Enabled
Command Mode
Global Configuration
Command Usage
If enabled, the switch will serve as querier if elected. The querier is
responsible for asking hosts if they want to receive multicast traffic.
Example
ip igmp snooping query-count
This command configures the query count. Use the no form to restore the
default.
Syntax
ip igmp snooping query-count count
no ip igmp snooping query-count
count - The maximum number of queries issued for which there has
been no response before the switch takes action to drop a client from
the multicast group. (Range: 2-10)
Default Setting
2 times
Command Mode
Global Configuration
Command Usage
The query count defines how long the querier waits for a response from
a multicast client before taking action. If a querier has sent a number of
queries defined by this command, but a client has not responded, a
countdown timer is started using the time defined by ip igmp snooping
Console(config)#ip igmp snooping querier
Console(config)#