24-Port Fast Ethernet Switch Management Guide

P RIORITY C OMMANDS
4-260
show queue cos-map
This command shows the class of service priority map.
Syntax
show queue cos-map [interface]
interface
• ethernet unit/port
- unit - Stack unit. (Range: 1-8)
- port - Port number. (Range: 1-26)
• port-channel channel-id (Range: 1-6)
Default Setting
None
Command Mode
Privileged Exec
Example
Priority Commands (Layer 3 and 4)
Console#show queue cos-map ethernet 1/1
Information of Eth 1/1
Traffic Class : 0 1 2 3 4 5 6 7
Priority Queue: 1 0 0 1 2 2 3 3
Console#
Table 4-66 Priority Commands (Layer 3 and 4)
Command Function Mode Page
map ip port Enables TCP/UDP class of service mapping GC 4-261
map ip port Maps TCP/UDP socket to a class of service IC 4-262
map ip precedence Enables IP precedence class of service
mapping
GC 4-262
map ip precedence Maps IP precedence value to a class of
service
IC 4-263
map ip dscp Enables IP DSCP class of service mapping GC 4-264
map ip dscp Maps IP DSCP value to a class of service IC 4-265
map access-list ip Sets the CoS value and corresponding output
queue for packets matching an ACL rule
IC 4-135