24-Port Fast Ethernet Switch Management Guide

VLAN C OMMANDS
4-232
Command Mode
VLAN Database Configuration
Command Usage
• no vlan vlan-id deletes the VLAN.
• no vlan vlan-id name removes the VLAN name.
• no vlan vlan-id state returns the VLAN to the default state (i.e., active).
• You can configure up to 255 VLANs on the switch.
Example
The following example adds a VLAN, using VLAN ID 105 and name RD5.
The VLAN is activated by default.
Related Commands
show vlan (4-240)
Configuring VLAN Interfaces
Console(config)#vlan database
Console(config-vlan)#vlan 105 name RD5 media ethernet
Console(config-vlan)#
Table 4-59 Configuring VLAN Interfaces
Command Function Mode Page
interface vlan Enters interface configuration mode for a
specified VLAN
IC 4-233
switchport mode Configures VLAN membership mode for an
interface
IC 4-234
switchport
acceptable-frame-types
Configures frame types to be accepted by an
interface
IC 4-235
switchport
ingress-filtering
Enables ingress filtering on an interface IC 4-236
switchport native vlan Configures the PVID (native VLAN) of an
interface
IC 4-237
switchport allowed vlan Configures the VLANs associated with an
interface
IC 4-238
switchport gvrp Enables GVRP for an interface IC 4-250