24-Port Fast Ethernet Switch Management Guide

VLAN C OMMANDS
4-230
VLAN Commands
A VLAN is a group of ports that can be located anywhere in the network,
but communicate as though they belong to the same physical segment. This
section describes commands used to create VLAN groups, add port
members, specify how VLAN tagging is used, and enable automatic VLAN
registration for the selected interface.
Editing VLAN Groups
vlan database
This command enters VLAN database mode. All commands in this mode
will take effect immediately.
Default Setting
None
Table 4-57 VLAN Commands
Command Groups Function Page
Editing VLAN Groups Sets up VLAN groups, including name, VID and
state
4-230
Configuring VLAN
Interfaces
Configures VLAN interface parameters, including
ingress and egress tagging mode, ingress filtering,
PVID, and GVRP
4-232
Displaying VLAN
Information
Displays VLAN groups, status, port members, and
MAC addresses
4-240
Configuring Private
VLANs
Configures private VLANs, port mode, and
primary/secondary associations
4-241
Table 4-58 Editing VLAN Groups
Command Function Mode Page
vlan database Enters VLAN database mode to add,
change, and delete VLANs
GC 4-230
vlan Configures a VLAN, including VID, name
and state
VC 4-231