24-Port Fast Ethernet Switch Management Guide

C OMMAND L INE I NTERFACE
4-205
spanning-tree
hello-time
Configures the spanning tree bridge hello
time
GC 4-209
spanning-tree max-age Configures the spanning tree bridge
maximum age
GC 4-210
spanning-tree default
priority
Sets the spanning-tree priority to use
increments specified by IEEE 802.1D
(steps of 1) or 802.1t (steps of 4096)
GC 4-211
spanning-tree priority Configures the spanning tree bridge priority GC 4-211
spanning-tree
pathcost method
Configures the path cost method for
RSTP/MSTP
GC 4-212
spanning-tree
transmission-limit
Configures the transmission limit for
RSTP/MSTP
GC 4-213
spanning-tree
backup-root
Adjusts the bridge priority in an attempt to
take over as the root bridge if it loses
contact with the original root device
GC 4-214
spanning-tree
mst-configuration
Changes to MSTP configuration mode GC 4-214
mst vlan Adds VLANs to a spanning tree instance MST 4-215
mst priority Configures the priority of a spanning tree
instance
MST 4-216
name Configures the name for the multiple
spanning tree
MST 4-217
revision Configures the revision number for the
multiple spanning tree
MST 4-218
max-hops Configures the maximum number of hops
allowed in the region before a BPDU is
discarded
MST 4-218
spanning-tree
spanning-disabled
Disables spanning tree for an interface IC 4-214
spanning-tree cost Configures the spanning tree path cost of
an interface
IC 4-220
spanning-tree
port-priority
Configures the spanning tree priority of an
interface
IC 4-221
Table 4-56 Spanning Tree Commands (Continued)
Command Function Mode Page