24-Port Fast Ethernet Switch Management Guide

SNMP C OMMANDS
4-152
snmp-server
This command enables the SNMPv3 engine and services for all management
clients (i.e., versions 1, 2c, 3). Use the no form to disable the server.
Syntax
[no] snmp-server
Default Setting
Enabled
Command Mode
Global Configuration
Example
snmp-server location Sets the system location string GC 4-155
snmp-server host Specifies the recipient of an SNMP
notification operation
GC 4-156
snmp-server enable
traps
Enables the device to send SNMP traps (i.e.,
SNMP notifications)
GC 4-159
snmp-server
engine-id
Sets the SNMPv3 engine ID GC 4-160
show snmp engine-id Shows the SNMPv3 engine ID PE 4-161
snmp-server view Adds an SNMPv3 view GC 4-162
show snmp view Shows the SNMPv3 views PE 4-163
snmp-server group Adds an SNMPv3 group, mapping users to
views
GC 4-164
show snmp group Shows the SNMPv3 groups PE 4-165
snmp-server user Adds a user to an SNMPv3 group GC 4-167
show snmp user Shows the SNMPv3 users PE 4-169
Console(config)#snmp-server
Console(config)#
Table 4-41 SNMP Commands (Continued)
Command Function Mode Page