24-Port Fast Ethernet Switch Management Guide

C OMMAND L INE I NTERFACE
4-139
access-list mac
This command adds a MAC access list and enters MAC ACL configuration
mode. Use the no form to remove the specified ACL.
Syntax
[no] access-list mac acl_name
acl_name – Name of the ACL. (Maximum length: 15 characters)
Default Setting
None
Command Mode
Global Configuration
access-list mac
mask-precedence
Changes to the mode for configuring
access control masks
GC 4-143
mask Sets a precedence mask for the ACL
rules
MAC-Mask 4-144
show access-list mac
mask-precedence
Shows the ingress or egress rule masks
for MAC ACLs
PE 4-146
mac access-group Adds a port to a MAC ACL IC 4-146
show mac
access-group
Shows port assignments for MAC ACLs PE 4-147
map access-list mac Sets the CoS value and corresponding
output queue for packets matching an
ACL rule
IC 4-147
show map access-list
mac
Shows CoS value mapped to an access
list for an interface
PE 4-148
match access-list mac Changes the 802.1p priority the priority
of a frame frame matching the defined
rule (i.e., also called packet marking)
IC 4-149
show marking Displays the current configuration for
packet marking
PE 4-138
Table 4-38 MAC ACL Commands (Continued)
Command Function Mode Page