24-Port Fast Ethernet Switch Management Guide

NITIAL

ONFIGURATION

2-2

The switch’s CLI configuration program, web interface, and SNMP agent

allow you to perform the following management functions:

• Set user names and passwords

• Set an IP interface for the management VLAN

• Configure SNMP parameters

• Enable/disable any port

• Set the speed/duplex mode for any port

• Configure the bandwidth of any port by limiting input or output rates

• Power attached devices using IEEE 802.3af Power over Ethernet

(PoE)

• Control port access through IEEE 802.1X security or static address

filtering

• Filter packets using Access Control Lists (ACLs)

• Configure up to 255 IEEE 802.1Q VLANs

• Enable GVRP automatic VLAN registration

• Configure IGMP multicast filtering

• Upload and download system firmware via TFTP

• Upload and download switch configuration files via TFTP

• Configure Spanning Tree parameters

• Configure Class of Service (CoS) priority queuing

• Configure up to 6 static or LACP trunks

• Enable port mirroring

• Set broadcast storm control on any port

• Display system information and statistics

• Configure any stack unit through the same IP address

1. SMC6824MPE and SMC6826MPE only